Breakthrough in Data Storage Fits 1,000 Terabytes on a Single DVD

The storage capacity of optical discs is mainly limited by the physical dimensions of the dots. But as there’s a limit to the size of the disc as well as the size of the dots, many current methods of data storage, such as DVDs and Blu-ray discs, continue to have low level storage density.

To get around this, we had to look at light’s fundamental laws.

Circumnavigating Abbe’s limit

In 1873, German physicist Ernst Abbe published a law that limits the width of light beams.

On the basis of this law, the diameter of a spot of light, obtained by focusing a light beam through a lens, cannot be smaller than half its wavelength – around 500 nanometres (500 billionths of a metre) for visible light.

And while this law plays a huge role in modern optical microscopy, it also sets up a barrier for any efforts from researchers to produce extremely small dots – in the nanometre region – to use as binary bits.

In our study, we showed how to break this fundamental limit by using a two-light-beam method, with different colours, for recording onto discs instead of the conventional single-light-beam method.

Both beams must abide by Abbe’s law, so they cannot produce smaller dots individually. But we gave the two beams different functions:

• The first beam has a round shape, and is used to activate the recording. We called it the writing beam
• The second beam plays an anti-recording function, inhibiting the function of the writing beam

The two beams were then overlapped. As the second beam cancelled out the first in its donut ring, the recording process was tightly confined to the centre of the writing beam.

This new technique produces an effective focal spot of nine nanometres – or one ten thousandth the diameter of a human hair.

The technique, in practical terms

Our work will greatly impact the development of super-compact devices as well as nanoscience and nanotechnology research.

The exceptional penetration feature of light beams allow for 3D recording or fabrication, which can dramatically increase the data storage – the number of dots – on a single optical device.

The technique is also cost-effective and portable, as only conventional optical and laser elements are used, and allows for the development of optical data storage with long life and low energy consumption, which could be an ideal platform for a Big Data centre.

Full Article:

http://www.goodnewsnetwork.org/earth/science/new-data-storage-fits-...